Chief Architect Premier X17 v27.1.0.54 Patch {2025} Full Download

Table of Contents

Overview:

Chief Architect Premier X17 v27.1.0.54 Patch is professional home design software for all aspects of residential and light commercial design. When you draw walls and place smart architectural objects such as doors and windows, the program creates 3D models, produces a list of materials, and, using powerful construction tools, helps produce documents. construction with site plans, outline plans, section details, and elevations. Chief Architect Premier Full Version is 3D architecture software for residential and light commercial design. Find out why millions of people are using Chief Architect as the home design software product of choice for 2D and 3D designs.

Chief Architect Premier X17 v27.1.0.54 Key Features:

Building & Design Tools

Use solid construction tools and designers to quickly plan according to standard construction practices and make the design process efficient and productive. Automatic and manual construction tools allow you to create different styles of roofs, stairs, frames – rods and frames, planning lists, materials to cut, buy and estimate, dimensions, cross-sections, altitude, and CAD tools.

Kitchen, Bath & Interior Design

Chief Architect Premier X17 v27.1.0.54 Crack uses smart design objects, such as cupboards, to quickly and easily create various styles, shapes, and sizes. The chief architect partners with certain manufacturers (cabinets, appliances, doors, windows, worktops, and floors) so that style, finishes, and other product-specific design details can be drawn and displayed with precision.

3D Design and Modeling Tools

When you draw walls, the program automatically creates 3D models and supports full 3D editing. With Chief Architect Premier Full Version, you can design on any screen for transparent and simultaneous editing between 2D and 3D. Advanced rendering provides realistic and artistic photo styles such as line art and watercolor. A large 3D library of architectural objects and tools facilitates detail and access to your designs so that style, finishes, and other product-specific design details can be achieved with precision.

CAD Tools for Productivity & Precision

Chief Architect Premier X17 v27.1.0.54 License Key has a powerful CAD software engine that includes tools for lines, polylines, splines, arcs, and solids to produce objects that range from custom entry columns to general ledger details bridges. Quickly manipulate objects with multiple copies, straighten, reflect, and replicate at certain intervals. The CAD-to-Walls tool imports AutoCAD files and provides mappings for the layers so you can quickly see the models in 3D. Custom CAD detail drawings, import in DWG / DXF / PDF format or select from over 500 CAD details in the SSA premium catalog to overlay your design.

Plans Sets & Construction Drawings

3D rendering and virtual tours help you sell projects and construction drawings to help you determine, authorize, and build. All of your project’s displays – Floor plans, framing, electrical, section details, and elevation have user-defined scales and links to specific images that are updated as your design changes. Layers control the appearance of each page of the image to help create detailed professional construction drawings.

Site Planning, Terrain, Decks & Landscaping

Create a site package for single or multiple batches. Import terrain topography data or create it with the terrain modeling tool – the terrain data can then be used to plan 2D sites or be displayed in 3D to display specific topologies. Road, sidewalk, hill, and valley tools provide additional details. For landscaping, there are more than 4,000 plants with detailed information on each plant, including maps of hardiness zones integrated. Define the North pointer and seasonal settings for shadow and overlay effects. Deck tools include automatic and manual framing bridges; adjusting plank and deck hardware.

Chief Architect Premier X17 v27.1.0.54 New Features:

Building-Construction:

Corner framing and connection types – standard, reduced, and laddered.
Header placement for vertical and depth location.
Combine headers for adjacent openings.
Wall girts and horizontal wall framing.
Roof purlins for horizontal framing members over trusses or rafters.
Balloon framing control – at the plate or ceiling height.
Trim and Extend for framing – trim deck planking at 45 degrees.
Tray ceiling framing can be defined and built separately.
Framing profiles – apply to general framing members like a trellis.
Framing Camera defaults – control the look and behavior of these cameras.

Presentation:

A new rendering engine with improved quality and performance.
Real-time ray tracing – create realistic renders in seconds!
GPU rendering and ray tracing – consistent lighting across all rendering techniques.
Add a watermark for cameras and walkthroughs as a default setting.
Overlay line drawing to render techniques – standard, clay, watercolor, and physically based.
A new clay rendering technique for abstract style views.
Walkthrough Previews – a new preview panel to see and interact with the walkthrough before recording.
Create orbital walkthroughs from a perspective camera view.

Drafting & Project Management:

Copy and paste elevation and section cameras.
Wall Elevations for vaulted ceilings.
Clip elevation cameras – expand and contract views to create a section of wall elevation.
Refined control to set up automatic and manual dimensions.
Create molding, roof, and skylight schedules.
Export schedules – TXT, CSV, or XML formats.
Material Lists use layer sets to control items in the list.
Opening Indicators for hinged and sliding doors/windows.
Assign labels for doors, windows, cabinets, and other objects to any layer.
Construction Lines – create a column grid with callouts to reference between floors and elevations.

Productivity:

Dynamic help system – provides relevant information about the task you are performing.
Project Browser thumbnail previews for saved cameras, elevations, schedules, and more.
Save Text to the Library – maintain and reuse the text in future projects.
Multiple select rooms – change room type, ceiling heights, or moldings simultaneously.
Match Properties on walls to apply the attributes from one wall to another wall.
A new search bar is available in the plan materials dialog to help locate items.
CAD Blocks stored in your plan can easily be revised using a new edit function.
Center, Trim, and Extend CAD objects in elevation views.
3D shapes are edited by subtracting, intersecting, and merging with polyline solids and 3D solids.

Design:

Extended stiles for framed cabinets.
Full overlay cabinets – reveal control for the right and left sides.
The cabinet faces item overlap control – sides, top, and bottom.
Remove the cabinet’s top or bottom – like a coffee station cabinet.
Define the width where an auto cabinet door changes from a single to a double.
Dimension to cabinet faces and openings.
Offset cabinet moldings – make them flush with both the cabinet box and cabinet doors.
Create molding schedules for rooms or cabinets.
Parametric pattern control for tile offsets – 1/2, 1/3, 1/4 or ?.

What’s new in Chief Architect Premier X17 v27.1.0.54?

(Released on 10-07-2025)

Installation:

Improved speed when migrating from Chief Architect X16 to Version X17.

Displaying Objects:

Fixed a problem that caused the Layer Set list to be inactive when the Layer Set Management dialog was first opened.
Corrected an issue in that could result in an object in a layerless state when its newly assigned layer was deleted.

File Management:

Added the ability to Pin files to the top of the Recent Documents List.
Simplified the process of importing a Project file when Chief Architect Project Management is not in use.
Fixed an issue that prevented a specific Project file from importing when Chief Architect Project Management was enabled.
New Show in Project Browser tool selects the currently active view or page in the Project Browser.
Added “Rename” to the contextual menu for custom subfolders in the Project Browser.
New Advanced Search dialog in the Project Browser when Chief Architect Project Management is active.
The Preview panel in the Project Browser now shows information when a Plan or Layout level item is selected in the Projects panel.
Corrected an issue that resulted in an imported PDF being treated as a material texture when Chief Architect Project Management was active.
Fixed an issue in the Asset Management dialog in which a blank space remained when the Thumbnail column was toggled off.
Fixed a problem that prevented Projects with long names from importing.
Improved the organization of the New Project from Template dialog.
Fixed an issue that prevented Chief Architect Project Management from activating when the user was signed in to their Chief Architect account.
Improved messaging when a PDF is imported when Chief Architect Project Management is in use.
Added the New Project from Legacy Folder tool for importing unmanaged plans and layouts into Chief Architect Project Management.
Added the option to add a Project to a folder on creation.
Native file icons now appear in the Asset Management dialog and Project Browser in the Mac version of the software.
Moved the Project Name field to the top of the New Project from Template dialog.
The Reset Preferences command will no longer overwrite Templates or Master List when using Chief Architect Project Management.

Preferences and Default Settings:

A new message now informs users that importing settings across plans that use different units is not supported.
Fixed a problem that placed the Custom Color Chooser’s Next Add Position in the incorrect location when the Reset Migration command was used.

Toolbars and Hotkeys:

Toolbar configurations can now be imported when using Chief Architect Project Management.

Window and View Tools:

Corrected an issue that prevented the Show Reference Floor(s) check box in the Plan View Specification dialog from working correctly when multiple Plan Views were selected.

CAD Objects:

Fixed a problem that prevented Custom Countertops and Slabs from being converted into CAD polylines when the CAD Detail From View tool was used.
Corrected a problem that caused editing of CAD Blocks in CAD Details to be significantly slower in plans with a large number of CAD Blocks.
The Continuous Drawing Mode can now be used with the Same Line Type edit handle for CAD objects.

Walls, Railings, and Fencing:

Fixed a problem that caused a drywall protrusion where an interior wall intersected a railing.
Fixed a case that caused a Wall Elevation to only show one part of a pony wall when automatic camera clipping was used.
Fixed an issue that caused errant footing wall types to be included in the list of wall types when importing plan settings.
Fixed an SEH that could occur when building framing.
Corrected an issue that prevented the Material Painter from working on single layer wall types.
Fixed a problem that prevented the top elevation of a pony wall from being lower than the top elevation of the floor.

Rooms:

Corrected a problem that prevented floor surfaces that were previously cut by a roof from regenerating after rebuilding the roof.

Dimensions:

Improved performance of Temporary Dimensions in cross section views.
Fixed an issue that sometimes prevented Temporary Dimensions from locating the nearest wall when a wall was selected.
Fixed a problem that prevented Temporary Dimensions from displaying when the Select Next Edge tool was used.
Corrected a problem that prevented Temporary Dimensions from working correctly when a schedule was selected.
Added a Snap Indicator for dimension lines at Automatic Dimension Offset locations.
Adjusted the system default Snap Line Separation for dimensions in layout.
Fixed some cases in which dimensions locating openings in 3D views could be clicked on although Move Object with Dimension was not applicable.
Corrected an issue that caused Temporary Dimensions for room heights in elevation views to be duplicated on each click.
Fixed a specific case in which a 0″ Temporary Dimension was incorrectly being generated.
Fixed a problem that caused 3D Dimension Text to appear very blurry when the text size was reduced.
Fixed an error that occurred when editing Material Regions in a specific plan.
Corrected a problem that caused Temporary Dimensions in one 3D view to appear across all open 3D views.
Fixed a Tab order issue on the General panel of Dimension Defaults dialog.
Fixed an issue that prevented Temporary Dimensions from displaying when a room was selected in 3D views.
Fixed a problem that prevented dimensions from locating Construction Lines.
Fixed an issue that caused 3D Temporary Dimension Arrow fills to display incorrectly.
Improved some cases in which a large number of Temporary Dimensions were generated unnecessarily.
3D Temporary Dimensions now show both the height and width of selected cabinets and openings simultaneously.
The Dimension Row Limit for Temporary Dimensions in legacy plans is now set at one to better agree with how they generate in Version X16.
Fixed a problem that prevented Temporary Dimensions from generating when an Architectural Block was selected in plan view.
Corrected an issue in which Temporary Dimensions did not display in 3D when the Exterior Room was selected.
Fixed an issue that prevented custom dimension arrowheads in CAD Blocks from being saved correctly in the plan, causing them to be lost on read.
Fixed an issue that prevented Temporary Dimensions from locating wall steps when a step edge was selected in a cross section view.
Adjusted the Temporary Dimension Defaults applied to legacy plans opened in Version X17 to more closely match what Temporary Dimensions located in the legacy version.

Text, Callouts, and Markers:

Corrected a problem that prevented content from a external spreadsheet from pasting correctly using the Paste Special tool.

Doors and Windows:

The Show Open/Closed in 3D edit tools are now available for Mulled Units and toggle state of all openings in the unit.
Fixed an issue that caused parts of nearby walls to disappear in 3D views if Show Open in 3D was selected while a Bay Windows was selected.
Fixed an issue in which the Lites In Left and Lites in Right settings were reversed for Double Casement windows.

Cabinets:

Fixed a problem that caused countertop overhangs on under-counter appliances to extend into walls or full height cabinets.
Fixed an issue in which the toe kicks of cabinets adjacent to a corner cabinet would clip each other.
Fixed an issue that sometimes caused a noticeable seam in automatic countertops over undercounter appliances.
Fixed a problem that caused a blind cabinet to lose its connection to the adjacent cabinet when it was copied and reflect/center/point to point pasting.
Corrected an issue that prevented materials used on cabinets, when merged, from correctly updating on all cabinets througout the plan.
Fixed a specific case in which fixture inserted into a cabinet in a legacy plan displayed in an incorrect location in Version X17.
Fixed an issue that caused a cabinet’s side backsplash to generate when next to an appliance.

Electrical:

Fixed a crash that occurred when opening the specification of a Ganged Electrical Block that was attached to a cabinet.

Schedules and Object Labels:

Fixed an issue that prevented the Totals Row from displaying if the schedule’s wrapping was set to Max Table Size.

Foundations:

Fixed an issue in which foundation walls continued to build at heights that accommodated a sill plate despite sill plates being removed from the default foundation wall.
Corrected a problem that prevented foundation wall footings from being selected and edited in 3D views.

Stairs, Ramps, and Landings:

Fixed a problem that prevented the preview in the Staircase Specification dialog from displaying when the stair’s layer was off in the default camera view Layer Set.
Roofs:
Fixed a specific case in which Auto Roof Returns caused errant roof planes to be generated.
Corrected an issue that prevented the “Remember my choice for this session” option from working when editing roof components instead of changing default roof materials.
Fixed a problem that caused roof fascia to build at incorrect sizes when eaves were set to be square cut in some cases.
Fixed a case in which a roof return did not build correctly in a specific plan.

Framing and Trusses:

Corrected a problem that prevented wall framing from generating when walls with multiple framing layers intersected.
Fixed a specific case in which a roof truss did not generate.
Fixed an issue in which roof truss ends would not stay square cut if their envelope was edited.

Trim and Moldings:

Fixed an issue that prevented CAD lines drawn on or within cabinets in elevation views could not be converted to Molding Polylines.

The Library:

Fixed an issue that prevented Library Browser search results from including some items in the Filter Results.

Symbol Objects:

The Options panel in Symbol Specification dialog is no longer hidden when Exterior and Interior type objects are group selected and edited.
Corrected an issue that caused under-counter appliances to be difficult to select.
Fixed a problem that prevented the Fillet and Chamfer edit tools from working on symbol object Cutout Polylines.
Library Objects marked to cut into the terrain now do so correctly.
Fixed an issue that caused Stretch Plane previews from being sized correctly when a symbol’s Bounding Box values were negative.
Fixed a case in which a legacy symbol set to cut into a wall generated the wall hole at an incorrect size.

Other Objects:

Fixed a specific case in which the Facet Angle of an arc on a custom Solid object could not be edited.
Fixed a problem that caused a Soffit set to Place Under Ceiling to move to the ceiling on the floor level below if there was a Tray Ceiling on the floor below.

Materials:

The Material Builder is now available in the Mac version of the software.

3D Views:

Fixed some cases in which camera Cross Section Lines displayed arrows.

3D Rendering:

New DLSS Real-Time Denoising option for GPU Ray Trace views on systems with Nvidia graphics.
Corrected a problem that allowed the Clay Rendering Technique to be applied in multiple selected orthographic cameras although that technique is not supported in orthographic views.
Fixed an issue that could cause Live Layout Views to be blurry when printed if the camera was set to use Super Resolution greater than 1.0.
Fixed an issue in the Mac version of the software that prevented Physically Based renderings from finishing denoising on high resolution displays.
Improved the Date/Time controls in the Sun Angle Specification dialog.

Pictures, Images, and Walkthroughs:

Fixed an issue in which the Create Sun Angle from Current Frame option in the Walkthrough Preview side window could create a duplicate of an already existing Sun Angle.
The Capture View to Clipboard option is now available in the Tools menu.

Layout:

Corrected a problem that could cause extra drawing sheet objects to be created in a Layout that could not be deleted.
Fixed an issue that caused Cross Section Lines in cross section views sent to layout as Live Views to disappear.

Screenshots:

How to install & activate it?

Disconnect from the internet (Recommended).
Extract and install Chief Architect Premier X17 v27.1.0.54 by using setup.
After the installation, don’t run the program or exit if running.
Copy the crack file to the installation directory and replace it.
It’s done, Enjoy Chief Architect Premier X17 v27.1.0.54 Full Version.

Chief Architect Premier X17 v27.1.0.54 Keygen & Crack {Tested} Full Version Free Download from the links given below!

Download Now